Garmin
Garmin Striker 4 3.5" Color Portable Fishfinder GPS 010-01550-10
- SKU:
- GAR0100155010
- UPC:
- 753759147044
- MPN:
- 010-01550-10
- Condition:
- New
Description
Garmin Striker 4 3.5-inch Portable CHIRP Fishfinder with GPS
Model: 010-01550-10UPC: 753759147044
- Easy-to-use 3.5-inch color fishfinder with built-in, high-sensitivity GPS
- Find fish; mark and return to hot spots, docks and ramps
- Convenient keypad operation
- Includes CHIRP (77/200 kHz) sonar transducer; transmit power (200 W RMS)/(1,600 W peak-to-peak)
- Upgrade to high performance CHIRP with a GT8 or GT15 transducer (each sold separately)
STRIKER 4 fishfinder with portable carrying case is perfect for fishing from a kayak or canoe and is especially handy for ice fishing. Mark and return to your hot spots, boat ramps and docks. You also can share your favorite waypoints and routes with other STRIKER and echoMAP™ chartplotter combos. Smooth Scaling™ graphics provide uninterrupted imagery when switching between depth-range scales. Sonar history rewind allows you to scroll back through sonar images to mark waypoints you originally may have missed. Includes carrying case, rechargeable battery, CHIRP (77/200 kHz) transducer, tilt/swivel mount and transom and trolling motor mounting kit. For high-performance CHIRP, purchase a GT8 or GT15 transducer (each sold separately).
Experience the Clarity of CHIRP
STRIKER 4 fishfinder includes a Garmin CHIRP (77/200 kHz) transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers.
Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation.
You also can upgrade to high-performance Garmin CHIRP technology, which provides crystal-clear sonar images with even more remarkable target separation and resolution from shallow to deeper depths. For better fishing, bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths to provide a more timely interpretation of what’s below.
Mark Spots with High-sensitivity GPS
Unlike regular fishfinders, STRIKER fishfinders have built-in, high-sensitivity GPS to locate your current position quickly and precisely, then maintain your GPS location anywhere you go on the lake. More importantly, they allow you to mark spots where the fish are biting so you can return to them again in the future. You also can mark docks, boat ramps and other locations on the lake. Just follow the path created on your screen to return to them whenever you wish.
Navigate Easily with Waypoint Map
Since the STRIKER fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks. It’s also a great tool for finding your way back to the boat ramp.
Check Your Speed on Screen
You can quickly and easily see your boat’s speed on the screen of your STRIKER fishfinder. It’s a great tool to make sure you are trolling at the right speed for the lure you’re using and for a particular fish species. It’s also a good way to tell if you are going the right speed in wake-controlled areas.
Fish Vertically with Built-in Flasher
STRIKER provides you with both a fishfinder and flasher all in 1 unit. Anytime you are stationary fishing, such as ice fishing or jigging for crappie, the built-in flasher will show you the bottom, whether it is solid or muddy, your jig or weighted bait, and the depth of fish as they swim into the sonar beam. You can even watch how high your jig is being lifted and dropped and whether fish move toward or away from it.
Take Your Fishfinder Anywhere
A portable kit is available to protect and carry your STRIKER fishfinder with GPS, so it’s perfect for kayak, canoe or ice fishing. It includes a sealed, rechargeable battery with charger, built-in transducer cable management and storage and suction cup transducer mount and float.
Display Size | 1.9'' x 2.9'' (4.9 x 7.3 cm); 3.5'' diag, (8.7 cm) |
Display resolution | 480 x 320 pixels |
Display type | HVGA color |
Water rating | IPX7 |
Audible alarms | Yes |
Sonar Features & Specifications | |
Dual-frequency (50/200 kHz) sonar capable | Yes |
Dual-beam (77/200 kHz) sonar capable | Yes |
Frequencies supported | Traditional: 50/77/200 kHz CHIRP (mid and high) |
Transmit power | 200 W (RMS) |
Maximum depth | 1,600 ft freshwater*, 750 ft saltwater* |
Bottom lock | Yes |
Water temperature log and graph | Yes |
Fisfinder Features | |
Split screen zoom | Yes |
Ultrascroll® (displays fish targets at higher boat speeds) | Yes |
Fish Symbol ID (helps identify fish targets) | Yes |
AutoGain Technology (minimizes clutter, maximizes targets) | Yes |
Adjustable depth line (measures depth of underwater objects) | Yes |
A-scope (real time display of fish passing through transducer beam) | Yes |
Water temperature sensor included | Yes |
Additional | |
Titl/swivel mount | Yes |
Integrated GPS | yes |
Mark Waypoints | Yes |
Course over Ground (COG) | Yes |
Dimensions | 3.6'' x 5.9'' x 1.6'' (91.6 x 150.8 x 42.8 cm) |
What's in the Box:
- Striker 4
- Dual-beam transducer
- Transom and trolling motor mounts
- Tilt/swivel mount
- Portable bag
- base/handle
- Foam Float
- Power cable
- rechargeable battery
- AC Charger
- Documentation