Propellers

A Devilfish (E01900) is a brass sleeve cutlass bearing that provides a wear surface between propeller shafts and struts or rudder shafts & rudder ports. Designed to have a rubber oil-resistant shaft and is chemical resistant. The rigid outer shell is...

Michigan Wheel can quote, upon request, an expanded range of bearings including: • Sizes for shafting up to 10" in diameter • Metric sizes from 20mm through 260mm • Flanged, non-metallic (phenolic) shelled, and spiral fluted bearingsThis product...

The purpose of thrust washers is to make sure you have enough space between the gearcase and the prop hub. They ensure that the prop and driveshaft splines have enough room to connect. The thrust gives a hard surface for the splined sleeve so the proper...

The shock caused by shifting is absorbed by the rubber inner bushing inside an outboard propeller hub. A reducing bushing, also known as a reducer bushing, is used to decrease or increase the size of a pipe thread. Nylon Bore Reducers are a fast remedy...

The shock of shifting is absorbed by a 1 3/4" to 1 3/8" NYLON (NB12) bushing inside an outboard propeller hub.. Should you hit something, the bushing acts as a "breakaway," allowing the prop to spin and safeguarding drive train components such as gears...

The 1 3/4" X 1 1/2" NYLON (NB13) is a high-quality nylon propeller bore reducer. It's a fast remedy for a propeller that's bored too big for the job. It comes complete with a brass step key. The nylon bushing appears to be adequate for low-horsepower...

Heads up for a great deal! Turning Point provides MasterGuard with the best installation kits and props housings for engines 6-300+hp in town! Turning Point's MasterGuard Hubs survive regular wear and tear over time without spinning or failing under...

POLAFLEX HUB (F41) is well-made from rubber (not plastic) to facilitate softer gear shifting, lessen vibration, and enhance impact deflection. Instead of using aluminum like cheaper models, they have robust brass or bronze splines. To build propeller...

Turning Point Hub Kit with 17 splines is the only company offering MasterGuard® Installation kits and prop housings with a Lifetime Warranty Hub for engines of 6-300+ horsepower. When purchasing replacement propeller housing, boaters can save up to 33%...

Eliminate Hub System Vibration and Chatter With an innovative one-piece design, parts are reduced, and common failures in eliminating multi-part hub systems. Eliminate Hub Cracking and Failure The glass-reinforced high-tech polymer construction increases...

Because it is already assembled and has pre-greased bearings, this XHS II V4 HUB KIT HIGH HP (206SH) fits to the axle without difficulty and avoids messy installations. Construction made of galvanized steel is proven reliable over the long term. A travel...

Michigan Wheel's XHS II Xchangeable Hub Propeller Series offers versatility and high performance. The exchangeable hub kit features a Delrin cushioned sleeve that absorbs stress and impact caused by shifting gears and is designed to spin under...