Navigation

Split Connector Threaded for RJ45 Network Cables - 18mmRoute cables in your vessel without drilling holes with Garmin's split connector threaded, RJ 45 cable.Compatible Devices:GDL 30/30AGMR™ 12xx SeriesGMR™ 18 SeriesGMR™ 20/21/24/40...

NMEA 2000® Backbone/Drop CableExtend your NMEA 2000® backbone with Garmin's 30' (10M) backbone/drop cable.Compatible Devices:AIS™ 300/600 Blackbox TransceiverGBT™ 10GCL™ 20 Low-light Imaging CameraGDL™ 40GET™...

NMEA 2000 Through Bulkhead AdaptorUse for transitions through bulk heads or panels. Simplifies installation when routing through a waterproof bulkhead or panel. Creates a connection point for removable equipment such as a computer interface.WARNING: This...

Pressure Sender 150 PSI - 1/8-27 NPT Features:Ground - StandardConnection - Knurled NutVoltage - 6-24VThread - 1/8-27 NPTFComponent Reference No. - 29/12Max. Pressure  - 150 PSI / 10 bar (10-180Ohm) *Sold as an IndividualWARNING: This...

8-Pin Transducer to 4-Pin Sounder Adapter CableConnect an 8-pin transducer to a 4-pin sonar port on a compatible marine device with this adapter cable.Compatible Devices:STRIKER™ 4STRIKER™ 4 Portable Bundle STRIKER™ 4 Portable...

Garmin STRIKER™ 4 Fishfinder Worldwide Version with 77/200kHz - 4-Pin Transducer with Transom & Trolling Motor Mounts3.5-inch CHIRP Fishfinder with GPSEasy-to-use 3.5-inch color fishfinder with built-in, high-sensitivity GPSFind fish; mark and...

SeaTalk 1 to SeaTalkng Converter KitThe SeaTalk 1 to Seatalkng converter allows select SeaTalk 1 devices to interface and communicate on the Raymarine SeaTalkng data network. It is compatible with legacy ST40, ST60+, Raystar 125 GPS sensors and LifeTag...

Micro TeeA Tee is used to tap into the trunk line for adding a drop connection. The standard tee is also available with a cap for a protected diagnostic connection. Tees can be mated with all other devices on the network of the same connector style...

BlueNet™ Network Cable - 20'The Garmin BlueNet marine network cables offer additional cable lengths to help with installations. Additional sizes are sold separately.

Open Water Adapter Kit - MEGA LiveThe adapter kit includes all accessories needed to convert the MEGA Live Imaging™ transducer for use on a boat. Features:What's Included: Shaft clamp, and all required cables (transducer and shaft sold...

NMEA 2000 Backbone Cable - 5MAncor's NMEA 2000 Approved Backbone Cables offer connection to an NMEA 2000 tee connector. The yellow couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The backbone...

LiveScope™ Bulkhead Connector KitFlush-mount the LiveScope™ extension cable so users can quickly connect and disconnect the LiveScope™ transducer. The kit includes a snap-on base, cover, weatherproof cap, and all mounting components...