Navigation

NMEA 2000 Through Bulkhead AdaptorUse for transitions through bulk heads or panels. Simplifies installation when routing through a waterproof bulkhead or panel. Creates a connection point for removable equipment such as a computer interface.WARNING: This...

Pressure Sender 150 PSI - 1/8-27 NPT Features:Ground - StandardConnection - Knurled NutVoltage - 6-24VThread - 1/8-27 NPTFComponent Reference No. - 29/12Max. Pressure  - 150 PSI / 10 bar (10-180Ohm) *Sold as an IndividualWARNING: This...

8-Pin Transducer to 4-Pin Sounder Adapter CableConnect an 8-pin transducer to a 4-pin sonar port on a compatible marine device with this adapter cable.Compatible Devices:STRIKER™ 4STRIKER™ 4 Portable Bundle STRIKER™ 4 Portable...

Garmin STRIKER™ 4 Fishfinder Worldwide Version with 77/200kHz - 4-Pin Transducer with Transom & Trolling Motor Mounts3.5-inch CHIRP Fishfinder with GPSEasy-to-use 3.5-inch color fishfinder with built-in, high-sensitivity GPSFind fish; mark and...

SeaTalk 1 to SeaTalkng Converter KitThe SeaTalk 1 to Seatalkng converter allows select SeaTalk 1 devices to interface and communicate on the Raymarine SeaTalkng data network. It is compatible with legacy ST40, ST60+, Raystar 125 GPS sensors and LifeTag...

Ethernet cable - 20 feetQuickly setup an ethernet connection between two Humminbird ethernet capable units.Available in four lengths.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause...

Micro TeeA Tee is used to tap into the trunk line for adding a drop connection. The standard tee is also available with a cap for a protected diagnostic connection. Tees can be mated with all other devices on the network of the same connector style...

BlueNet™ Network Cable - 20'The Garmin BlueNet marine network cables offer additional cable lengths to help with installations. Additional sizes are sold separately.

Open Water Adapter Kit - MEGA LiveThe adapter kit includes all accessories needed to convert the MEGA Live Imaging™ transducer for use on a boat. Features:What's Included: Shaft clamp, and all required cables (transducer and shaft sold...

NMEA 2000 Backbone Cable - 5MAncor's NMEA 2000 Approved Backbone Cables offer connection to an NMEA 2000 tee connector. The yellow couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The backbone...

LiveScope™ Bulkhead Connector KitFlush-mount the LiveScope™ extension cable so users can quickly connect and disconnect the LiveScope™ transducer. The kit includes a snap-on base, cover, weatherproof cap, and all mounting components...

NMEA 2000 90° Elbow ConnectorAncor's NMEA 2000 Approved 90 degree elbow makes cable routing easier. The connector is installed between two cables to reduce stress on the cables and create a compact installation.Features:Color coded for easy...