Navigation

This has a RayNet Female connector at one end and a RJ45 Female Gland connector at the other end. The Gland makes the RJ45 Female socket watertight. A typical use for this cable would be to convert a "RJ45" Digital Radar Cable to a "RayNet" Radar Cable,...

This 4 meter cable has a female micro C NMEA2000® connector on one side and a simnet connector on the other.

This 1 meter cable has a female micro C NMEA2000® connector on one side and a simnet connector on the other.

The Raynet to RJ45 Ethernet (M) adapter can be used to connect new c and e-Series MFDs to the SR6 or 8-Port Seatalk High Speed network switch. When used in conjunction with a crossover coupler, this adapter can also convert the Ethernet connection on a...

The Raynet to RJ45 Ethernet (M) adapter can be used to connect new c and e-Series MFDs to the SR6 or 8-Port Seatalk High Speed network switch. When used in conjunction with a crossover coupler, this adapter can also convert the Ethernet connection on a...

The Raynet to RJ45 Ethernet (M) adapter can be used to connect new c and e-Series MFDs to the SR6 or 8-Port Seatalk High Speed network switch. When used in conjunction with a crossover coupler, this adapter can also convert the Ethernet connection on a...

The new RayNet (Male) to RayNet (Male) Cable Joiner adapter lets you connect 2 standard RayNet networking cables together in instances where you need to extend the length of a cable run. The cable is 3.9-inches (100mm) long.

The new Raynet (Female) to SeaTalkhs (Male) cable allows to directly connect your G-Series, E-Wide, C-Wide and E-Classic MFDs to new generation RayNet radar, sonar or other accessory that utilises the new RayNet connection. The adapter cable is 10 feet...

The new RayNet (F) to SeaTalkhs (F) cable adapter allows you to fit the existing waterproof, locking SeaTalkhs cables used with G-Series, E-Wide, C-Wide and E-Classic MFDs to new generation RayNet multifunction displays. The adapter cable is 15-inches...

The new 400mm RayNet to RayNet network cable can be used to daisy-chain 2 adjacent RayNet devices together. It is also useful for joining two adjacent HS-5 Network Switches together on larger systems where multiple switches are necessary. This network...

The Maretron PT-SNUB-01 Pressure Snubber is used in combination with the Maretron FPM100 Fluid Pressure Monitor and a pressure transducer FPM100 accessory. The PT-SNUB-01 dampens pressure variations between a pressure source and the pressure transducer,...

The IF-NMEA2K2 is an interface to convert data from NMEA0183 format to NMEA2000 / CAN bus format and vice versa. In addition to the normal conversion mode, the High Speed mode to convert sensor data for Autopilot as well as an AIS mode dedicated to AIS...